Call for Availability
Part Number:

DDC01.1-K050B-RS60-50-FW

Manufacturer: Bosch Rexroth Indramat
Series: DDC Digital Intelligent Servo Drives

Current response time:

4 Minutes

31 Seconds

  • Rated 4.7 (18 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
Free Ground Shipping
Worldwide Delivery
Repair Options Available

The DDC01.1-K050B-RS60-50-FW servo drive, weighing approximately 21-22 kg, operates with power requirements ranging from 6 to 22.5 kVA depending on load. Manufactured by Bosch Rexroth Indramat and part of the DDC Digital Intelligent Servo Drives series, it offers an IP65 protection category and handles ambient temperatures up to +45°C.

Call for Availability
Part Number:

DDC01.1-K050B-RS60-50-FW

Manufacturer: Bosch Rexroth Indramat
Series: DDC Digital Intelligent Servo Drives

Current response time:

6 Minutes

34 Seconds

  • Rated 4.7 (18 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
Free Ground Shipping
Worldwide Delivery
Repair Options Available

The DDC01.1-K050B-RS60-50-FW servo drive, weighing approximately 21-22 kg, operates with power requirements ranging from 6 to 22.5 kVA depending on load. Manufactured by Bosch Rexroth Indramat and part of the DDC Digital Intelligent Servo Drives series, it offers an IP65 protection category and handles ambient temperatures up to +45°C.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

The DDC01.1-K050B-RS60-50-FW is a digital intelligent servo drive designed by Rexroth Indramat. The servo drive belongs to the DDC series and operates as a high performance servo controller for industrial automation systems. It is engineered with an integrated SERCOS interface command module which enables real time digital communication with master control units.

The DDC01.1-K050B-RS60-50-FW servo drive is equipped with a resolver feedback system which ensures precise position and speed detection of the connected motor. The servo drive delivers a peak current of 50 A optimized for demanding motion control applications. When operated at this rated current the noise emission of the servo drive is significantly reduced which makes it suitable for environments requiring quiet operation. The cooling method used in this servo drive is air based assures that the unit maintains optimal operating temperatures during continuous and peak loads. The DDC01.1-K050B-RS60-50-FW servo drive is classified under protection category IP65 which provide full protection against dust and low pressure water jets. The permissible ambient temperature for rated operation is +5 to +45 °C, and up to +55 °C under derated conditions. The storage and shipping temperature range is -30 to +85 °C, and it can operate in environments with up to 95% relative humidity. The servo drive basic weighs 21 kg and is part of Series 1 which allows compatibility with multiple modular systems.

The DDC01.1-K050B-RS60-50-FW Digital Intelligent Servo Drive may generate up to 500 W of power loss under maximum load which is effectively managed by the cooling system. The bleeder resistor integrated into the unit provides a continuous bleeder power of 0.25 kW and supports peak bleeder power between 10 to 40 kW which enables the safe dissipation of regenerative energy.

DDC01.1-K050B-RS60-50-FW Technical Specifications

Peak Current: 50 A
Storage And Shipping Temperatures: -30 to +85 °C
Permissible Relative Humidity: Maximum 95%
Protection Category: IP65
Firmware: Identify firmware as a separate order
Weight Of Basic Unit: 21 kg
Series: 1
Motor Feedback: Resolver feedback
Noise Emission at Motor: reduced (only with 50 A rated current)
Command Module: SERCOS interface
Cooling Type: Air
Power Loss (max Device Load): 500 W
Continuous Bleeder Power: 0.25 kW
Peak Bleeder Power: 10-40 kW
Permissible Ambient Temperature: +5 to +45 °C (Rated), +55 °C (Derated)

Frequently Asked Questions about DDC01.1-K050B-RS60-50-FW


Q: How does the SERCOS interface benefit DDC01.1-K050B-RS60-50-FW?

A: It enables real-time control with precise synchronization between the drive and master unit.

Q: Why is resolver feedback used in this servo drive?

A: Resolver feedback provides reliable position sensing in harsh, noisy industrial environments.

Q: How does peak bleeder power between 10–40 kW help?

A: It ensures safe energy handling during rapid deceleration or emergency stops.

Q: How is thermal load managed during full operation?

A: Air-based cooling and 500 W loss dissipation maintain temperature stability.

Q: Is DDC01.1-K050B-RS60-50-FW suitable for high-vibration areas?

A: Yes, its rugged design and resolver resist feedback errors under vibration.

Internal Product Review

  • ‘‘The DDC01.1-K050B-RS60-50-FW servo drive performs reliably under peak demands with 50 A current output and precise resolver based motor feedback. It ensures safe energy dissipation using a 0.25 kW bleeder and supports high regeneration up to 40 kW. The drive is vital for responsive automation requiring high torque and controlled braking.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo