DDC01.1-K050B-RL25-01-FW
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
52 Seconds
The DDC01.1-K050B-RL25-01-FW servo drive has a continuous mechanical load range of 4 kW to 7.5 kW. Manufactured by Bosch Rexroth Indramat, it is part of the DDC Digital Intelligent Servo Drives series and features IP65 protection. The unit weighs between 21 kg and 22 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDC01.1-K050B-RL25-01-FW is an intelligent digital controller designed by Bosch Rexroth Indramat to be used with AC servo motor units. This controller is built to last; it features a compact housing unit that withstands common industrial interference like water splash and dust. It is possible to modify the operation of this drive controller to meet the operation requirements of different applications; this modification is done by installing the basic unit of the controller with an auxiliary plug-in cards and a software module that matches the intended application of the controller. The fully configured controller can then be used with a compatible AC servo motor, such as the MDD motor series. This converter unit has a higher level of protection than other conventional controllers, which makes it possible to install the controller into a forward feed unit.
The DDC01.1-K050B-RL25-01-FW frequency converter is generally regarded as a maintenance-free device; however, when the controller is used in a highly polluted environment, the heatsink and blower mesh on the controller becomes too dirty. In these environments, operators are required to clean these components regularly to allow for easy heat dissipation. During motor deceleration, the controller gracefully handles the excess current supplied by the decelerating motor and converts it to heat, which is easily dissipated. The conversion of the regenerated current to heat is done using the bleeder resistor present in the converter. Flammable materials should be kept away from this resistor
The DDC01.1-K050B-RL25-01-FW is intended to be used with a power connector that also meets the IP 65 protection class, the motor feedback cable and the connectors used for other plug-in modules are inserted into the DDC.
Frequently Asked Questions about DDC01.1-K050B-RL25-01-FW:
Q: How are error messaged communicated through the DDC01.1-K050B-RL25-01-FW?
A: There is an LED unit integrated in the front panel of the DDC01.1-K050B-RL25-01-FW for the control of error messages.
Q: What is the protection classification of the DDC01.1-K050B-RL25-01-FW?
A: The DDC01.1-K050B-RL25-01-FW is classified as an IP65 unit. Its housing is able to prevent interference of dust and water splashes.
Q: What motor unit is the DDC01.1-K050B-RL25-01-FW controller designed for?
A: The DDC01.1-K050B-RL25-01-FW controller is built for the control of AC servo motor units such as the MDD motor.
Q: Can the DDC01.1-K050B-RL25-01-FW be used without grounding?
A: No. The proper installation of this unit requires secure grounding to prevent electrical accidents.
Q: What is the recommended ambient temperature for the DDC01.1-K050B-RL25-01-FW controller?
A: During operation, ambient temperature around this unit should be kept below 45 degrees Celsius.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names, and brands appearing herein are the property of their respective owners.
Copyright © 2025 - Wake Industrial - All Rights Reserved