Product Description

The DDC01.1-K050B-DL02-00 is a digital microprocessor-controlled drive controller produced by Rexroth Indramat. This controller offers accurate and precise control to servo motors in industrial servo systems. The  DDC01.1-K050B-DL02-00 drive controller is characterized by high reliability and its long service life. Configuration and diagnosis operation can be performed on the drive controller through the CTA display unit connected to the controller. The drive controller is supplied with special configuration modules that contain parameters and programming blocks that adapt the drive to specific industrial applications. Configuration components used for the DDC01.1-K050B-DL02-00 drive controller include the single-axis positioning module, the input-output interface card, the inter bus S interface cards, and the software module. The drive's configuration should be carried out by well-trained technicians as a mismatch in the parameters inputted in the drive can cause dangerous movements in the servo system.

The DDC01.1-K050B-DL02-00 drive controller connects to the mains through a three-phase electrical connection; it uses a 3 x 230 Volts voltage to carry out a normal operation in industrial systems. The drive controller's housing meets the IP65 protection category, which means the it's operation is not affected by dust or low-pressure water spray.

The DDC01.1-K050B-DL02-00 is designed to operate with a rated current of 50 Amperes and is particularly suited to the MDD series AC servomotor. In the case of operational or electrical error, the DDC01.1-K050B-DL02-00 immediately signals to the 7-segment H1 display, which immediately displays an appropriate error message to alert the user. The drive controller contains a built-in 3.5 volts lithium battery with a service life of 10 years. The battery helps the software module of the drive to hold information in the absence of electric current. This unit can be shipped globally with a one-year warranty period from Wake Industrial.