Product Description

The CSB01.1C-S3-ENS-EN1-NN-S-SS-FW basic universal control section from Bosch Rexroth is equipped with a single axis. This section supports configuration based on requirements. The product is an integral part of the supporting drive controller. This device is smaller in size than the power section. The unit supports a limited number of plug in and removal actions. Its SERCOS III module functions as an Ethernet based variant of the SERCOS 2 interface. The section portrays 100Base-TX compatibility according to IEEE 802.3u standards for the S3 module. This product has no safety option. The device related IndraDyn / Hiperface / 1 Vpp / TTL encoder module is connected through a 15-pole female D-Sub connector and is capable of performing standard encoder evaluation. This unit has a typical encoder supply voltage of 11.6 V. It helps the drive controller to control and monitor the operation of the motor in a drive system. The section handling and operation must be done by only qualified and trained personnel. This product has an SS design. The device may get damaged as a result of inappropriate handling. This unit should be allowed to come in contact with exposed conductive parts and tools only after they have been discharged. It is intended to be used in its original state. The control section must not be subject to operating conditions that do not adhere to the specified ambient conditions. This product must be used only after reading and understanding its associated documentation. The device has a very hot surface during and for a brief period after operation. The unit is intended to be commissioned only after ensuring that the emergency stop switch is in working condition. It should not be used without a grounding connection.