CP2215-0000 Beckhoff
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
39 Seconds
The Beckhoff CP2215-0000 is part of the CP Panel PC Systems series and features an aluminum housing with front IP65 and rear IP20 protection. It is equipped with a 24 VDC power supply, two Ethernet ports, four USB ports, and a multi-finger touch screen. Weighing 5.9 kilograms, it includes one RS232 serial port and supports 1 x 2.5-inch and 1 x CFast storage slots.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CP2215-0000 is a 15-inch panel PC that Beckhoff integrates into its CP Panel PC Systems series for combined visualization and control duties on machine fronts. The unit consolidates an industrial touchscreen, motherboard, I/O, and power interface inside a sealed aluminum housing so that PLC logic, HMI graphics, and field networking run directly at the mounting arm or cabinet door. By coupling Windows-based runtime software with built-in communication ports, the product eliminates the need for a separate box PC in many automation cells.
The front bezel carries an IP65 rating while the rear section keeps to IP20, so spray exposure is limited to the display side only. Two Gigabit Ethernet controllers provide network drops for real-time fieldbus or MES traffic, and four type-A receptacles provide USB channels for service sticks, scanners, or UPS dongles. All computing sections draw from a single 24 VDC source, simplifying cabinet power distribution. Security is addressed through an onboard fTPM 2.0 chip that stores encryption keys in hardware. The multi-finger touchscreen overlays an aluminum front that resists panel torsion, and video mirroring to an external monitor is possible through a 1 x DVI port. A single RS232 connector supports legacy serial devices, while the 3.5-inch motherboard offers one 2.5-inch bay and a separate CFast slot for drive replacement.
The cast chassis withstands shocks up to 5 G for 30 ms without data loss, and the design tolerates ambient humidity to 95% non-condensing for humid plant floors. Total mass is held to 5.9 kg, allowing installation on standard VESA swing arms without counterweights. Rear ventilation paths follow convection only, so no fan service is required, and the aluminum shell serves as the primary heat sink for internal components during continuous duty cycles.
