Product Description:

The AX8206-0200-0000 is a dual-channel servo drive manufactured by Beckhoff in the AX Digital Servo Drives series. It interfaces between an industrial controller and two synchronous motors, modulating the DC link energy so the motors receive precise current and voltage waveforms. Within an automation cell the unit regulates position, speed, and torque, making it suitable for packaging axes, pick-and-place gantries, or any application that needs coordinated motion from a compact drive module.

Each channel can deliver up to 6 A of continuous current while the shared DC bus supports a combined throughput of 12 A at an 8 kHz switching frequency, allowing both axes to run at nominal load without derating. Short load surges are handled by a peak envelope of 28 A for five seconds, giving enough headroom for rapid acceleration profiles. The internal capacitor bank is protected for bus voltages up to 848 VDC, so the drive can be tied into high-voltage regenerative link systems without overstressing its power stage. Output carriers are synthesized at up to 599 Hz, a frequency that enables smooth torque production even on motors with low electrical time constants and high pole counts. Four optically isolated digital inputs per axis accept limit switches or drive enable commands, reducing the need for external I/O cards.

During standby the electronics draw 12 W of basic power loss, minimizing cabinet heat when the axes are inactive. A DC link capacitance of 135 µF stores recovered braking energy and stabilizes the bus during rapid duty-cycle changes. Control logic and brake relays consume only 570 mA from the 24 V auxiliary supply, leaving ample current for other panel devices. Mechanical integration is simplified by the 60 mm width, 192 mm depth, and 230 mm height, while the aluminum housing weighs just 2 kg, easing load calculations for swing-out panels and compact enclosures.