Product Description:

The 8BVE0500HC00.000-1 is a drive power interface manufactured by B & R Automation and assigned to the 8BVE ACOPOSmulti Drives series. Intended for modular multi-axis systems, the unit forms the central DC link that distributes energy to connected inverter modules and routes regenerated power back to the supply. By combining high-voltage handling with integrated alarm outputs, it supports coordinated motor control in packaging machines, printing lines, and other automation equipment.

During operation, the module feeds a common rail at 750 VDC. With a 50 A semiconductor fuse, it can deliver 40 Aeff continuously, which corresponds to 30 kW of sustained bus power for downstream servo amplifiers. Short loading bursts are covered by a peak capability of 100 A, letting axes accelerate without additional buffering. Internal losses are limited to 200 W, and excess heat is removed through either cold-plate or pass-through mounting surfaces. The electronic alarm channel is energized at 30 VDC and can sink up to 1 A to signal fuse trips or thermal events. A logic-level contact closes after a switching delay of 3 ms, ensuring rapid shutdown when protective thresholds are crossed.

The control electronics draw only 25 VDC ±1.6% from the system backplane and consume a maximum of 5 W, so auxiliary supplies can be sized conservatively. The enclosure carries an IP20 protection rating, making it suitable for mounting inside closed electrical panels where conductive dust is excluded. Cold-plate installation sets the depth at 212 mm, while overall dimensions reach 317 mm in height and 53 mm in width for dense vertical stacking with other ACOPOSmulti modules. Reliable function is maintained up to 4000 m above sea level, provided ambient derating rules are followed. Its narrow housing supports compact placement beside matching inverter sections in multi-axis control cabinets.