The E22NRFT-LNN-NS-00 is a hybrid step motor built by Pacific Scientific. The motor features a size of NEMA 23 and NEMA mounting. Pacific Scientific is always committed to meeting its client's needs by building high performance and top-notch products in quest of intelligence and automation solutions. Every product manufactured by Pacific Scientific is not only powerful and efficient but it also long lasting and cost effective. The E22NRFT-LNN-NS-00 from Pacific Scientific is one of those products. It offers high performance with enhanced heat dissipation. This post elaborates on the technical information about this motor to make sure that you can take advantage of the E22NRFT-LNN-NS-00 as you install and run it.
The E22NRFT-LNN-NS-00 is a stepper motor that comes with two rotor stacks with low and standard inertial rotors. The standard inertia generates low acceleration rate compared to the low one. The rotor inertia for the E22NRFT-LNN-NS-00 motor is almost 0.025 to 0.0036 kgm 2 X 10 -3. This step motor weighs around 1.13kg to 2.5kg and it comprises a series of arrangement.
The E22NRFT-LNN-NS-00 offers a torque of 0.049 Nm to 7Nm and its holding torque is 1.39 Nm to 197Nm. Additionally, the motor runs on a rated current of 6.5A and going beyond this limit will lead to demagnetization that can halt the operation. Therefore, you must strive to preserve that rated current every time. The motor comes with a thermal resistance of 4.5°C/watt and a phase resistance of 0.21 Ω. In most cases, the value of thermal resistance is measured when the motor is at standstill and not mounted. Additionally, the E22NRFT-LNN-NS-00 motor comes with a phase induction of 0.4 mH.
|Encoder Option/Special Sequence||No Feedback/Standard Motor|
|Size||NEMA 23 frame size (2.25 dia.)|
|Number of Rotor Stacks||2 Stacks|
|Winding Leads||8 Lead (n/a C construction)|
|Winding Type||Max. torque at low speed|
|Shaft Configuration/Shaft Modifications||Single/Smooth|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2019 - Wake Industrial - All Rights Reserved