Product Description

E4809-770-032 is a relay board created by Okuma Cadet designed to be used with two main types of Amp Control Boards: V6 (PCB) or V5.3 (PCB).

You need two detection+ SS relay boards to handle the two platforms of a stereo drive. E4809-770-032 can connect several components and use a single communication port of host devices like a single board computer, laptop or computer. This module is available in two unique footprints and is enclosed in a case with electrical isolation or the OEM circuit board. The board uses a stratagem based on the CSMA/CD (Carrier Sense Multiple Access) protocols. The CSMA/CD monitors the module for a duration of inactivity before the DAQ starts its transmission.

OKUMA BOARD E4809-770-032-3 is designed with a Multiple Access (MA), meaning that the moment the board is free, all the DAQ module in the platform has the same prospect to transmit a frame. There is also collision detection (CD) utilizes non-destructive bitwise arbitration to reservation the reliability of a data frame when more than 2 DAQ modules try to transmit at the same time. Since the data board that wins intercession stays intact when a collision. This means that there is no additional communications delay during collision irrespective how this occurs.

To interact with DAQ modules in OKUMA BOARD E4809-770-032-3, commands are transmitted to the specific units by engaging a header character at the address. This allows the module can be routed to a suitable unit. If you intend to use several units, the DIP switch for every group must be set at different positions for them to be assigned a different header character.