DSA 175-230-S

  • Rated 4.6 (5 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: M.1300.9602
  • Stock: In-Stock, Ships 3-5 Days
  • Call for Expedited Shipping and Product Condition Options
The DSA 175-230-S is manufactured by Kollmorgen as part of their retired DSA Drive Series. This part features an input voltage of 100-240 Vrms Three Phase and an input frequency of 47-63 Hz. The DSA 175-230-S also holds an AC input current of 30 A rms and a continuous output of 35 A.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock!

DSA 175-230-S

  • Rated 4.6 (5 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: M.1300.9602
  • Stock: In-Stock, Ships 3-5 Days
  • Call for Expedited Shipping and Product Condition Options
The DSA 175-230-S is manufactured by Kollmorgen as part of their retired DSA Drive Series. This part features an input voltage of 100-240 Vrms Three Phase and an input frequency of 47-63 Hz. The DSA 175-230-S also holds an AC input current of 30 A rms and a continuous output of 35 A.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Repairs
Sell Us Your Surplus
Have a DSA 175-230-S to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The Kollmorgen DSA 175-230-S is a servo drive. If the drive is not used for a period of time, it should be stored in a clean and dry location where the ambient temperature is maintained between -40 to 70 degrees Celsius and where the non-condensing relative humidity range is between 5 to 95%. The drive should not be exposed to a corrosive atmosphere during storage. The DSA 175-230-S drive must be enclosed in grounded conductive enclosure offering protection as defined in standard EN 60529 to IP 55 such that they are not accessible to an operator or an unskilled person. The ambient temperature at the location where the drive is installed should not exceed 131 degrees Fahrenheit. The DSA 175-230-S should be mounted on a flat and vertical surface that will not be subjected to shock, moisture, dust or corrosive vapors.

A minimum of 2 inches of spacing should be provided above and below the mounted DSA 175-230-S drive. A minimum 5 inches of spacing should be provided to the left and right sides of the drive. Isolation transformers are not required to be used but may be required to match the voltage requirements of the control to the AC supply. The DSA 175-230-S is a rated for single-phase 100 to 240 Volts AC input. The rated nominal and inrush current values are 30 Amps and 50 Amps respectively. The continuous output current value is 35 Amps. The continuous output power ratings are 3.75 kilowatts at 115 Volts AC and 7.5 kilowatts at 230 Volts AC. Weight of the DSA 175-230-S drive is 9.3 kilograms. The power dissipated as heat during operation is 300 Watts plus the dissipative shunt.

  • dsa 175-230-s
  • dsa-175-230-s

DSA 175-230-S Technical Specifications

AC Input Current Nominal: 30 A rms
AC Input Frequency: 47-63 Hz
AC Input Voltage: 100-240 Vrms Three Phase
Continuous Output Current: 35 A
Output Peak Current : 75 A
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo