COVID-19 Update: Wake Industrial is open and available to support your automation needs.
The VT-VSPA1-2-10-V0-0 is viable for controlling proportional pressure values DBET-6X, and DBEM...-7X. This value amplifier has a required differential input that ranges from 0 to +10V and its range of current input are 4 to 20mA. The ramp generator comes with separately adjustable up/down ramp times. It enables input and external ramp time presetting. Bosch Rexroth AG has carefully designed it to ensure short-circuit protection and easy cable break detection of the solenoid conductor. The VT-VSPA1-2-10-V0-0 also has a reverse polarity protection of the supply voltage.
The VT-VSPA1-2-10-V0-0 has a power supply unit with making current limiter. It supplies the required negative and positive supply voltages. The internal command value signal is measured from a total number of 6 up signals or external command value signal which are available at differential input. Following specifications apply to the VT-VSPA1-2-10-V0-0. For the standard value 0% the current input, differential input and the command value socket are 4mA, 0V and 0V respectively. However for the standard value +100% the current input, differential input and the command value socket are 20mA, +10 V and +10V.
The VT-VSPA1-2-10-V0-0 has a four command value call-ups range from w1 to w4. The external voltages with command values 1 to 4 are either defined by external potentiometers or by the voltage output +10V. All the internal potentiometer will act as limiters or attenuators while using the external potentiometer. You can only operate one call-up at a time. In case of operating several call-ups simultaneously, call up w4 has the highest priority whereas the call-up w1 has the lowest priority. The VT-VSPA1-2-10-V0-0 can only be assembled when de-energized and it weighs 0.15 kg (net).
|Connection Type:||48-pin male multipoint connector, DIN 41612, design F|
|Operated proportional pressure valves:||DBET-6X and DBEM...-7X|
|Additional Functions:||Factory Assigned|
|Operating Voltage:||24 VDC + 40 % - 20 %|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved