Rexroth, Indramat, Bosch Proportional Valve Amplifier in the VT-VSPA1 Series. This Proportional Valve Amplifier features a Component Series of 1X or 10 to 19 along with a Operating Voltage of +24 VDC + 40 % - 5 %.
|1 Year Wake Industrial Warranty included||Worldwide shipping via DHL, UPS, and Fedex||Repair options are available for this unit||Exchange credit for your defective unit available.|
To Speak to a sales representative for pricing & lead time:
The VT-VSPA1-1-1X is a proportional valve amplifier from Rexroth, Indramat, Bosch. This is a device in the VT-VSPA1 series. This unit is an analog part with a 32 pin male connector process connection. This valve amplifier has a current rating of 1.8A and with a current output of 800 – 1600mA Solenoid. It also features a voltage rating of 24VDC and a power rating of 50VA. The unit’s frequency rating is 250 Hz clock while its temperature rating is 0 to 50 degrees Celsius.
This proportional valve amplifier from Bosch Rexroth has a component series of 1X or 10 to 19. The operating voltage of the unit is +24 VDC +40 % - 5%. The unit features pressure valves for operation control and other functions can be factory assigned. The unit features differential input so one can easily switch between current input and voltage.
The VT-VSPA1-1-1X valve amplifier from Rexroth Bosch features a front plate and a multipoint connector to allow an easy user interface. It can be adjusted for up and down ramps thanks to the built-in ramp generator. The unit also features a clocked output stage. There is a LED indicator lamp which allows for a “ready for operation” signal. The unit also comes equipped with protection against reverse polarity for its supply of voltage. More protection features include protection of the solenoid cable against short circuit damage. There is also a fail-safe to detect if the solenoid cable breaks along with current input of 4 to 20mA along with a front panel. The unit is small and lightweight weight it at approximately 0.1kg and has dimensions of 182 by 20 by 128.4 mm in depth, width and height respectively.
|Connection Type:||32-pole male multipoint connector and front plate|
|Operation Control:||For pressure valves|
|Component Series:||1X or 10 to 19|
|Additional Functions:||Factory Assigned|
|Operating Voltage:||+24 VDC + 40 % - 5 %|