Product Description

The VEP40.4DBN-512NN-MAD-1G0-NN-FWembedded terminal manufactured by Bosch Rexroth is integrated with a ready contact on pins 4 and 5 on its X1S connector. This contact helps in determining if the terminal is ready for operation or there is a pending error. The switching capacity of the ready contact must never be exceeded. The product has a height of 290mm and a width of 350mm. The cables used for connecting the device must feature strain reliefs on them. It should be installed on an appropriately sized mounting cutout on an even mounting surface. The embedded terminal must be secured in place by fastening the nuts that are located behind the mounting bolts.

The terminal should be used with a conductive and metallic coupling or connector housing that features large-area shield support. The product is integrated with an Intel Celeron processor that has a clocking frequency of 600MHz. The various errors and states of the device are represented by four LEDs that are housed on the upper portion of its front panel. The LED lights up in green to represent normal operation and remains OFF when there is no 24VDC supply voltage. This VEP40.4DBN-512NN-MAD-1G0-NN-FW terminal is backed by a one-year Wake Industrial warranty and can be delivered to your preferred address.

The touchscreen of this embedded terminal must be operated with gloves only after ensuring that there are no hard particles such as glass chips or fragments on them. The product gives a reduced performance if the compact flash card utilization is over 70%. There is a chance of data loss and uncontrolled machine movements if a blue screen appears or the device freezes. The type-plate on the rear of the unit contains several details that can prove to be useful in case the terminal needs to be serviced for any reason.