Product Description

The VDP16.3AKN-D1-NN-NN is an IndraControl based HMI manufactured by Bosch Rexroth. It comes with a 12” TFT display with an 800 * 600 resolution, CDI interface, four USB slots, and one placed at the front end. It has no touch capabilities but comes with 16 function keys, 16 machine keys, and 14 additional keys all found on a keyboard. Some other features found in the VDP16.3AKN-D1-NN-NN include a status LED operation for the hard disk, UPS, temperature, and voltage. It consumes 20 W of power supplied through a single 24 V power supply unit. It has a vibration and shock resistance of 1g and 15g, respectively. The overall protection category and front protection degree of the VDP16.3AKN-D1-NN-NN are IP20 and IP 65, respectively.

The manufacturer advises that during receipt of the VDP16.3AKN-D1-NN-NN, you need to make sure that the shipment matches your order by checking the nameplate and confirming the specifications with your delivery note. If you satisfied, you should go ahead and verify if it’s in pristine condition. Check for any signs of visible damage and contact the seller’s sales department immediately. Have a professional install the unit. Some parts are susceptible to wear and tear when they exceed a certain number of operating hours.

Inform the manufacturer of any hardware failure. And if it’s an emergency, you will need to consult a professional. But to ensure the machine lasts, you will need to use safety extra-low voltage as stipulated by the EN regulations. If the front panel is dusty, the manufacturer advises using a damp cloth to remove the particles.