Product Description

The Rexroth TVM 2.2-050-220/300 is a TVD series supply module. According to the type code, the designation is TVM, the series is 2, and the configuration is 2. Type current for the TVM 2.2-050-220/300 is 50 Amps. This rated output is only available when the ambient operating conditions comply with the manufacturer’s recommendations. Rexroth recommends maximum 1000 meters altitude and temperature between 5 and 45 degrees Celsius. When the supply is operated outside these recommended values then the current output will be less than 50 Amps. Input of the TVM 2.2-050-220/300 supply is compatible with 220 Volts AC (three phase). AC systems rated for different voltages can be connected to the supply through an autotransformer. Circuit breakers or fuses can be used to protect the supply input from anomalies in the AC mains system.

DC bus of the TVM 2.2-050-220/300 module is rated for 300 Volts DC during power supply operation. The DC bus voltage can range between 255 and 345 Volts DC. Care must be taken during troubleshooting or maintenance of the power supply by ensuring that the supply is disconnected from input power and the DC bus is allowed to discharge. Failure to follow this precaution can lead to electric shock and death. The TVM 2.2-050-220/300 provides DC control voltages rated for 24 Volts / ±15 Volts. The voltage range for the 24 Volts DC voltage is 24 to 30 Volts, the continuous current is 8 Amp and the ripple is approximately 10%. The voltage range for the 15 Volts DC voltage is 14.9 to 15.1 Volts, the +15 Volts continuous current is 1.3 Amps, the -15 Volts continuous current is 1.0 Amp and the ripple is approximately 0.1%. This unit can be shipped globally with a one-year warranty period from Wake Industrial.