Product Description

The TDM 1.2-050-300-W1 is an AC servo drive from Rexroth Indramat. The servo drive features a modular design. The standard device is intended for use with the manufacturer’s MAC71 to MAC160 range of servomotors. It features a model code of 2 and a series code of 1. The product is one of the TDM series of servo drives. The unit has a current rating of 50A and a link circuit rated voltage of 300VDC. This link voltage can increase or decrease by 15%. The servo drive can be purchased from Wake Industrial and sent to any location in the world with a warranty of one year.

The servo drive comes fitted with an X1 connection port that can be used to establish a bus connection. The device may be used as a cost-effective servo controller for automation needs. The product is intended for use on low and medium power ranges. It supports a MOD 1 fixed setting with soldered resistors as a substitute for the programming module. The unit weighs 10g. It incorporates screws with hexagonal recessed holes for mounting purposes. The drive has a mounting altitude of a maximum of 1,000m above sea level without any reduction of rated data. The cooling of the device takes place with the help of a built-in fan through forced ventilation.

The AC drive has an ideal operating temperature range of +5°C to +45°C with the rated data. The unit fan has a supply voltage rating of 115V or 220V. There must be a minimum gap of 80mm above and below the point of installation for the ventilating air outlet and inlet. The product must be installed in a completely sealed cabinet or housing that can withstand a maximum temperature of +45°C. The device must not have any heat-producing parts installed directly under it.