Product Description

Rexroth Indramat electric servo drives have improved the control of synchronous and asynchronous motors on the industrial floor. These drives have a modular design in both their hardware and software enhancing their flexibility. The Indramat RD 500 drive systems are designed to accommodate a wide range of industrial applications. This lowers the cost of purchasing a new drive each time a new application is introduced on the industrial floor. The flexibility of this series of drives makes them ideal to handle either induction or synchronous motors without compromising on their performance and or reliability.

The RD51.1-4B-007-L-D1-FW is a servo drive designed and manufactured by Rexroth Indramat. It has an operating voltage rating of between 380 Volts AC and 480 Volts AC with an allowance of plus or minus 10 percent. This voltage range enables the drive to seamlessly fit into the existing voltage supply on the industrial network. With a built-in brake chopper, the drive can be used with motors that are likely to be rotated by an overhauling load because it controls the voltage when the energy from the overhauling load is fed back into the circuit. The RD51.1-4B-007-L-D1-FW has a modular software and hardware design expanding the types of applications it can handle.

The Rexroth Indramat RD51.1-4B-007-L-D1-FW has a power rating of 7.5 kilowatts and supports an external standby power of less than or equal to 110 Kilowatts at a voltage of 24 Volts. By supporting a forced air cooling method, the drive can be deployed in industrial environments with a relatively high temperature. Note that despite the RD51.1-4B-007-L-D1-FW being cooled through forced air, it needs to be mounted and operated in adequately ventilated spaces.