PPC-R22.1N-T-Q2-P1-NN-FW

  • Rated 4.7 (20 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911171113
  • Stock: In-Stock, Ships 3-7 Days
  • Call for Expedited Shipping and Product Condition Options
The PPC-R22.1N-T-Q2-P1-NN-FW is part of the PPC Controller Series manufactured by Rexroth Indramat Bosch. This PPC Controller features a rated value of 24 VDC and a tolerance of -15% / +20% (according to EN61131-2 1994). The PPC-R22.1N-T-Q2-P1-NN-FW also features a permissible range of 19.2 ... 30 VDC (ripple factor included).

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock! PPC-R22.1N-T-Q2-P1-NN-FW | Rexroth, Bosch, Indramat PPC Controller Series | Image

PPC-R22.1N-T-Q2-P1-NN-FW

  • Rated 4.7 (20 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911171113
  • Stock: In-Stock, Ships 3-7 Days
  • Call for Expedited Shipping and Product Condition Options
The PPC-R22.1N-T-Q2-P1-NN-FW is part of the PPC Controller Series manufactured by Rexroth Indramat Bosch. This PPC Controller features a rated value of 24 VDC and a tolerance of -15% / +20% (according to EN61131-2 1994). The PPC-R22.1N-T-Q2-P1-NN-FW also features a permissible range of 19.2 ... 30 VDC (ripple factor included).

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a PPC-R22.1N-T-Q2-P1-NN-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The PPC-R22.1N-T-Q2-P1-NN-FW is a RECO CNC module from Bosch Rexroth. This module has a design code of 2. Its power supply connection makes use of a cable with a 0.75mm2 to 1.5mm2 cross-section based on current requirements. The product is likely to have a high discharge current and high voltage during operation. The device must be installed only in commercial machinery. It should be started only if the machine that it is installed on, adheres to the national standards and regulations on safety, as well as other safety specifications. The module must be operated and repaired only by qualified and trained staff.

The safety conductor of the CNC module should always be firmly and permanently connected to the supply mains. The housing of the product becomes very hot while operating and must not be touched to avoid burns. The emergency stop switch must be mounted in a position that can easily be accessed by the operator. The device should not be disassembled or opened in a pressurized state. The unit features an H1 LED display at its top. Its module rack cannot be used to control I/O modules. The product must be installed only after the module rack is mounted.

The module rack should be engaged on a DIN TS top hat rail of size 35 x 27 x 15mm and secured in position with a locking screw. The CNC module weighs 1.3kg. The device functions between a temperature range of 0°C and +45°C without reduced performance. The 24VDC power supply has a tolerance limit of -15% or +20% according to EN 61131-2 specifications. The product features one ready-for-operation relay to assist in system monitoring. The relay has a minimum lifetime of 500,000 switch cycles when it is protected against excess current. The module can be shipped with a warranty of one year to your preferred address.

PPC-R22.1N-T-Q2-P1-NN-FW Documents

  • PPCR22.1N-T-Q2-P1-NN-FW
  • PPCR22.1NTQ2P1NNFW
  • PPC R22.1N T Q2 P1 NN FW

PPC-R22.1N-T-Q2-P1-NN-FW Technical Specifications

Permissible Range: 19.2 ... 30 VDC (ripple factor included)
Rated Value: 24 VDC
Tolerance: -15% / +20% (according to EN61131-2 1994)
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo