PPC-R22.1N-T-N1-N2-P2-FW

  • Rated 4.5 (19 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: 1070170293
  • Stock: In-Stock, Ships 3-7 Days
  • Call for Expedited Shipping and Product Condition Options
The PPC-R22.1N-T-N1-N2-P2-FW is part of the PPC Controller Series manufactured by Rexroth Indramat Bosch. This PPC Controller features a rated value of 24 VDC and a tolerance of -15% / +20% (according to EN61131-2 1994). The PPC-R22.1N-T-N1-N2-P2-FW also features a permissible range of 19.2 ... 30 VDC (ripple factor included).

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock! PPC-R22.1N-T-N1-N2-P2-FW | Rexroth, Bosch, Indramat PPC Controller Series | Image

PPC-R22.1N-T-N1-N2-P2-FW

  • Rated 4.5 (19 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: 1070170293
  • Stock: In-Stock, Ships 3-7 Days
  • Call for Expedited Shipping and Product Condition Options
The PPC-R22.1N-T-N1-N2-P2-FW is part of the PPC Controller Series manufactured by Rexroth Indramat Bosch. This PPC Controller features a rated value of 24 VDC and a tolerance of -15% / +20% (according to EN61131-2 1994). The PPC-R22.1N-T-N1-N2-P2-FW also features a permissible range of 19.2 ... 30 VDC (ripple factor included).

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a PPC-R22.1N-T-N1-N2-P2-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

Bosch Rexroth provides long-lasting and high-quality products for different industries. The company’s products such as VisualMotion controls, brake resistors, and converters are widely used in the international market.

The PPC-R22.1N-T-N1-N2-P2-FW model is a part of the VisualMotion 10 control system which is capable of controlling up to 40 intelligent digital drives of Rexroth IndraDrive, Diax 04, and EcoDrive 03 drive system. The SERCOS interface is used to perform communication between control and drives whereas LocalReco 02 back-plane bus is used for data exchange between PPC-R control and Reco 02 I/O modules. The PPC-R22.1 VisualMotion control has been developed for use in single or multiple axis drives and control tasks. For executing specific functions of an application, the motion control and every drive controller has to be programmed before starting it up. The PPC-R22.1 VisualMotion control can be programmed by using PC software (VisualMotion Toolkit). The allowable voltage range for the model is 19.2 – 30 VDC including the permissible ripple of 4 Vpp. The model can be mounted in slot 00 of the Reco 02 rack in a vertical upright position.

The model PPC-R22.1N-T-N1-N2-P2-FW provides protection against solid particles having a diameter greater than 12 mm but it will not provide any resistance against liquids due to its IP 20 protection standard. Maintain minimum clearance at the top and bottom of the control to prove sufficient room for heat dissipation. The programmable limit switch (PLS) master and slave module are installed in this model. The control can be accessed through an optional EtherNet connection or DCOM. The PROFIBUS-DP slave module is installed in this model. The permissible altitude level on which the device can perform ideally is 1500 meters above sea level without reduction in rated data and its ambient temperature range is 0 to +45 degree Celsius. It is equipped with an H1 4-digit alphanumeric matrix display and a 32 MB compact memory card to store control data. The firmware for this model must be ordered as a separate sub-item. Get this VisualMotion control from Wake Industrial.

PPC-R22.1N-T-N1-N2-P2-FW Documents

  • PPCR22.1N-T-N1-N2-P2-FW
  • PPCR22.1NTN1N2P2FW
  • PPC R22.1N T N1 N2 P2 FW

PPC-R22.1N-T-N1-N2-P2-FW Technical Specifications

Permissible Range: 19.2 ... 30 VDC (ripple factor included)
Rated Value: 24 VDC
Tolerance: -15% / +20% (according to EN61131-2 1994)
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo