PPC-R22.1N-T-L2-NN-NN-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
Rexroth, Indramat, Bosch Controller Firmware in the PPC Series. This controller features a Configuration of Factory Assigned / Not Equipped / Not Equipped along with a Memory Expansion Module of Not Fitted.

PPC-R22.1N-T-L2-NN-NN-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
Rexroth, Indramat, Bosch Controller Firmware in the PPC Series. This controller features a Configuration of Factory Assigned / Not Equipped / Not Equipped along with a Memory Expansion Module of Not Fitted.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Exchange
Call to find out about our exchange credit for your defective unit.
Sell Us Your Surplus
Have a PPC-R22.1N-T-L2-NN-NN-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The PPC-R22.1N-T-L2-NN-NN-FW is a powerful control unit in an IP 20 rating. Depending upon the loaded software and the application, it is a multi-purpose platform that works as a PLC. The unit is available in two enclosure type of various widths - a double width versions and a single width version.

Both the interface are fully connected which are available on the controller. The data transfer function is only chosen by the relevant application. With the PPC-R22.1N-T-L2-NN-NN-FW the COM interface is introduced through separate slot plate if is not already has been allocated for another purpose. The operator input terminal bus allows application-related operator various input terminal to be used. It is only possible with a cable that is 50 m long.

Before you could install the PPC-R22.1N-T-L2-NN-NN-FW you should fix the module carriers. The module carriers consist of PPC-R unit and related I/O modules as per requirements. Before you install a module carrier, latch it on a DIN rail and then fasten with a screw. You can install up to four modules side by side. Make sure you install the PPC-R22.1N-T-L2-NN-NN-FW on slot 0 to allow it to control the RECO bus. Each model is secured using two fixing screws. You can also leave some gaps to have capacity to install additional modules later.

The modules can be damaged, therefore make sure you only insert or remove connectors and modules when the power is switched off. Tighten the fixing screws prior to commissioning to make sure later movements that will lead to disconnection of the connectors. All the modules must be properly screwed to the modular carriers. Screening the electronic components and grounding the controller needs at least a 6mm square long grounding cable which is laid between the stud of the controller and the grounding point of machine. All the devices and the power supply must be grounded in the star-shaped configuration.

  • PPC R22.1N-T-L2-NN-NN-FW
  • PPC.R22.1N-T-L2-NN-NN-FW
  • PPCR22.1N-T-L2-NN-NN-FW
  • PPCR221NTL2NNNNFW

PPC-R22.1N-T-L2-NN-NN-FW Technical Specifications

Product Group
Product Group PPC
Housing Version for RECO unit
Series 22
Version 1
Memory Expansion Module Not Fitted
Other Version Ethernet
Configuration Factory Assigned / Not Equipped / Not Equipped
Firmware Factory Assigned