Product Description

The PPC-R02.2N-N-N1-N2-P2-FWCNC module from Bosch Rexroth is one of the several such modules in the MTC200 product family. This PPC series product is intended for installation in a switch cabinet along with the RMB02.2 sub-rack. It must be assembled vertically inside the cabinet for thermal reasons and to avoid damage to the components. The device takes up two slots of the module rack. The unit does not support a PC-card compatible 4MB PSM flash memory. The module does not come fitted with the lithium battery that it needs for operation. The S1 button at the top can be used to switch displays or for other operations.

The CNC module features H1 diagnosis display to diagnose the malfunctions and operating states. The product incorporates an R type housing design. The firmware features several components such as the boot loader/monitor, APR firmware and CPU firmware. This device must not be changed structurally before putting it into use. It should not be operated in a damaged or faulty state. The unit should be used only with parts and accessories provided by the manufacturer. The module is mostly used in machine tools. The unit can be delivered all over the world through noteworthy shipping partners.

This module must not be used if the ambient operating conditions are not met. The product has a size of 83.7 x 192 x 150mm (W x H x D) and weighs 1.3kg. The device is compatible with only a COM interface for diagnosis. This interface is a 15-pin D-Sub socket. The unit has a maximum gain of 5% and a maximum overall capacity of 52W. The module works with a 24VDC power supply. The X11 PROG serial interface and X15 BT bus connection at the bottom of the module have no functionality. The CNC module is backed by a one-year warranty.