COVID-19 Update: Wake Industrial is open and available to support your automation needs.

KSM01.2B-071C-10N-S1-HG0-SE-NN-D7-NN-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
  • Call for Expedited Shipping and Product Condition Options
KSM Servo Motor manufactured by Rexroth, Indramat, Bosch. This motor's size is signified by 071 and is Not Equipped with a holding break. This servo motor also includes a master communication of SERCOS 2, and a connecting voltage of DC 750 V.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

KSM01.2B-071C-10N-S1-HG0-SE-NN-D7-NN-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
  • Call for Expedited Shipping and Product Condition Options
KSM Servo Motor manufactured by Rexroth, Indramat, Bosch. This motor's size is signified by 071 and is Not Equipped with a holding break. This servo motor also includes a master communication of SERCOS 2, and a connecting voltage of DC 750 V.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a KSM01.2B-071C-10N-S1-HG0-SE-NN-D7-NN-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

Bosch Rexroth’s KSM01.2B-071C-10N-S1-HG0-SE-NN-D7-NN-FW distributed servo drive with basic performance features has a 071 size code. The product must be switched ON only after the guards and covers are installed. The electrical connection points of the device should not be touched when the power supply is activated. The unit should be protected from water and external contact by using an external housing. It may give out dangerous movements in instances such as incorrect parameter input before commissioning, improper cable connection, or wiring, etc. The power connection of the drive must be isolated using a safe starting lockout or an emergency stop circuit to avoid unintentional startup.

This servo drive and control system should be disconnected with a master switch and secured against reconnection during repair and maintenance work or cleaning. The disconnection must also be ensured if the product is to be kept unused for a long period. The product should not be operated near radio, high-frequency, and remote-control equipment as far as possible. The unit must be used only in systems and machines that operate in industrial areas. The H14 LED flashes green if the parameter mode is activated or the drive is not yet enabled, although it is error-free.

This distributed servo drive may cause injury to personnel or damage to property if it is tipped, dropped, or subject to mechanical stress. The protective sleeves of the motor should be removed only before mounting and fitted once again during storage or transport. The mounting must be done in a dust-free and dry environment. The flange of the unit can be mounted using M10 size screws with 51Nm tightening torque. If there is a firmware update failure, the device attempts to load the firmware from the multimedia card after the last switch ON and from the last switch OFF. The servo drive with a one-year warranty can be delivered to any address across the globe.

  • KSM012B071C10NS1HG0SENND7NNFW
  • KSMO1.2B-O71C-1ON-S1-HGO-SE-NN-D7-NN-FW
  • KSM01.2B 071C 10N S1 HG0 SE NN D7 NN FW

KSM01.2B-071C-10N-S1-HG0-SE-NN-D7-NN-FW Technical Specifications

Connecting Voltage: DC 750 V
Holding Brake: Not Equipped
Master Communication: SERCOS 2
Size: 71