COVID-19 Update: Wake Industrial is open and available to support your automation needs.

KSM01.2B-061C-61N-S1-HP2-SE-NN-D7-NN-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
  • Factory New Pricing Available! Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
KSM Servo Motor manufactured by Rexroth, Indramat, Bosch. This motor has a winding of 61 and a DC 24 V, Electrically Released holding break. This servo motor also includes a master communication of SERCOS 2, and a connecting voltage of DC 750 V.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

KSM01.2B-061C-61N-S1-HP2-SE-NN-D7-NN-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
  • Factory New Pricing Available! Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
KSM Servo Motor manufactured by Rexroth, Indramat, Bosch. This motor has a winding of 61 and a DC 24 V, Electrically Released holding break. This servo motor also includes a master communication of SERCOS 2, and a connecting voltage of DC 750 V.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a KSM01.2B-061C-61N-S1-HP2-SE-NN-D7-NN-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The KSM01.2B-061C-61N-S1-HP2-SE-NN-D7-NN-FW is a distributed servo drive from Bosch Rexroth with the features of both servomotor and a servo drive. The device encompasses a 24VDC holding brake. The holding brake can be released electrically using the X2 connector for servicing and commissioning purposes. The multimedia card of the unit can be removed from the X7 slot after the cover is unscrewed. The contents of this card must be backed up before the parameters or firmware of the servo drive are changed. The product does not support a safety option on its X41 connector. The unit has a rated input power voltage ranging between 540VDC and 750VDC.

This distributed servo drive features basic performance and deploys natural convection cooling mode. It houses a hybrid electrical connector and a keyway shaft with a shaft sealing ring. The device must be mounted, installed, operated, stored, and transported correctly as per instructions, for the safe and optimal operation of its components. The product should be operated and repaired only by qualified technicians. The connectors of the unit must not be plugged in or removed when its components are in the ‘powered mode’. The H14 LED gets illuminated in yellow if a firmware update is in progress. The connectors should not be removed and there should be no interruption to the 24V supply when this update is in progress.

The preset 24V rating of the digital inputs helps activate the positive and negative directions of rotation as well as enable the drive. The device functions with the MMC firmware if there is a variation from the internal firmware. The cooling ribs of the supporting motor must be cleaned regularly so that there is no adverse functioning due to the accumulation of dirt, shavings, or dust. The bearings should be replaced if they emit a running noise. The KSM01.2B-061C-61N-S1-HP2-SE-NN-D7-NN-FW distributed servo drive can be shipped to any international destination with a warranty period of a year.

  • KSM012B061C61NS1HP2SENND7NNFW
  • KSMO1.2B-O61C-61N-S1-HP2-SE-NN-D7-NN-FW
  • KSM01.2B 061C 61N S1 HP2 SE NN D7 NN FW

KSM01.2B-061C-61N-S1-HP2-SE-NN-D7-NN-FW Technical Specifications

Connecting Voltage: DC 750 V
Holding Brake: DC 24 V, Electrically Released
Master Communication: SERCOS 2
Winding: 61