KSM01.2B-041C-42N-S1-HG0-SE-NN-D7-NN-FW
- Stock: Call for Quote
COVID-19 Update: Wake Industrial is open and available to support your automation needs.
This company was fantastic to work with! Very patient with us to make sure we ...
~ Carla Morgan Excellent Kentucky, USANext day air shipping and we are up and running!! Thanks so much!
~ Jeanne Wolter Excellent Colorado, USAWe asked for a fast turn around and Wake was up to the task!
~ Darrell Chapman Excellent Indiana, USAI contacted Gregg one morning in desperate need of two servos to get our Filler ...
~ Paul Kovacs Excellent California, USAThe service that I received was outstanding!
~ Gary Douglas Excellent Ontario, CanadaUnderstood our situation, and worked to help us get it solved. Very responsive, and stepped ...
~ Brian Tomlin Excellent Arizona, USAThe KSM01.2B-041C-42N-S1-HG0-SE-NN-D7-NN-FW is produced by Bosch Rexroth AG. It is one of the servo drives in the series of Rexroth IndraDrive Mi distributed servo drive KSM. The encoder for this product is an optical encoder, singleturn Hiperface with 128 increments. The shaft is plain with a shaft sealing ring. The product has a mass of 5.5 kg.
To probably use the motor drive, care must be taken to follow the manually carefully. Improper handling can lead to injuries or damage. The products must not be stressed mechanically, thrown, tipped, or dropped. Only suitable tackles must be used. The optional blower housing must never be used to lift the motor. Protective equipment and clothing must be used and worn during transport. Safety shoes are also required. The products must be protected from dampness and corrosion.
When the motors are delivered, they have a protective sleeve and cover over the output shaft and the flange sockets. These must stay on the motor when it is being transported or stored. When it is time to mount the motor, the protective sleeve must be removed. Should the product need to be returned, the protective sleeve must once again be used.
The motor flange as well as the drive shaft must be protected from damage. The drive shaft must not be subjected to impact, as this damages the encoder and ball bearing. When mounting or dismounting the drive elements such as pulleys, coupling disks, and toothed wheels, these elements must be heated up evenly. Alternatively, a tool appropriate for mounting or dismounting procedure can be used. The mounting procedure involves preparation steps followed by the actual mounting of the motor and the flange. The KSM01.2B-041C-42N-S1-HG0-SE-NN-D7-NN-FW can be shipped globally with a one-year warranty period from Wake Industrial.
Connecting Voltage: | DC 750 V |
Holding Brake: | Not Equipped |
Master Communication: | SERCOS 2 |
Winding: | 42 |
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2021 - Wake Industrial - All Rights Reserved