Product Description

The HNF01.1A-A075-E0309-A-500-NNNN is a mains filter from Bosch Rexroth. This is used along with HCS and HMV converters from the manufacturer. It is listed among the HNF series of such devices from them. The accessory helps to make sure that there is no deviation to the EMC limit values. The converter has a maximum input voltage of 3 * 480 VAC when the unit is used. The mains filter has a line code of 1 and a variant code of 1. The three-phase accessory is compatible with one-axis systems and supports a maximum cable length of 75m.

The device has a mains connection voltage of 3 x 400 to 500VAC and a nominal current rating of 309A. The unit features an E type supply system and can be used only with feedback devices. Products like pumps and blowers must not be used at the mains filter. The filter suppresses interference of three-phase drive controllers with a voltage rating of up to 480V. It can be used in EMC industrial areas according to DIN EN 61800-3 specifications. The filter can be shipped to any address globally through our logistics network.

The drive featuring the converter with the filter is used for controlling and monitoring the operation of the manufacturer’s motors. The controller must be commissioned only after programming so that the motor performs the application-specific functions. The mains filter has an IP 20 protection rating according to IEC 60529 specifications. It must be mounted inside the control cabinet in the standard mounting position. An isolating transformer should be used between the mains filter and mains when the filter is used in mains that is grounded through an outer conductor. The manufacturer is well-known internationally for its wide range of electrical products that meet most such requirements.