Product Description

The HMV01.1R-W0105-A-07-FNN4 is a 105 kilowatt rated industrial power supply. It is designed by Bosch Rexroth for IndraDive systems. The power supply is comprised of a control panel which is a separate part which is plugged on to the supply unit, signal processors and power connections / control voltage connections. The control panel is supplied with the power supply. The control panel has a 8-digit display and four keys. The display shows operating state information, activated commands, phases during power supply initialization, diagnostic error messages, warnings and diagnostic command messages. The displays have set priorities: current drive status has the highest priority. Shipment containing the HMV01.1R-W0105-A-07-FNN4 also contains a safety instructions brochure, standard display, touch guard, a joint bar and some connectors. The minimum mounting clearance is 100 millimeters below the vertically mounted power supply.

The mounting clearance may need to be increased depending on the bend radius of the input power cable. Additionally, a minimum clearance of 60 millimeters is also required in front of the power supply. Enclosure of the supply comes with IP 20 rating. DC bus on the HMV01.1R-W0105-A-07-FNN4 is rated for nominal voltage of 700 Volts. The input voltage range is 400 to 480 Volts AC. The HMV01.1R-W0105-A-07-FNN4 is a regenerative supply with internal blower. The HMV01.1R-W0105-A-07-FNN4 is a convection cooled power supply. Faults are signaled via the display on the control panel. Stored fault messages need to be reset before the HMV01.1R-W0105-A-07-FNN4 can be operated again. Errors can be reset by pressing the escape key on the control panel, activating the reset command on the drive controller or by switching the control voltage off. Troubleshooting and maintenance activities for the HMV01.1R-W0105-A-07-FNN4 should be performed by experienced personnel. This unit can be shipped globally with a one-year warranty period from Wake Industrial.