Product Description

The HMV01.1R-W0065-A-07-NINN power supply unit manufactured by Bosch Rexroth features a Bb1 contact that indicates when the unit is ready for operation. This product must have a minimum clearance of 300mm at the top and 130mm at the bottom. The device is equipped with a rated power consumption control voltage input of 108V. Its X32 connector can be used to connect the signals that control the ZKS stage and the mains contactor. This ZKS input activates the DC bus circuit function when the supply unit fails. The joint bar supplied with the product helps to connect its associated drive controller with another controller.

The device features an IP 20 degree of protection. It has a 700VDC bus nominal voltage rating and 65kW rated power output. The unit is equipped with a type-plate that highlights various details that can be useful at the time of service. The product comes in a size of 440 x 262 x 350mm (H x T x B) and weighs 31kg. The supply unit can be used at a maximum temperature of 55° with derated data. The DC device renders the rated input current for the related power section. It requires firmware for its successful operation. The unit comes with one-year warranty support and can be sent to you through our reliable delivery network.

The power supply unit supports connectivity to a RS 232 serial interface at its X2 connector. The X14 connector of this product helps in mains voltage synchronization. The device requires a wire size of 35mm² or AWG 3 according to EN 60204-1 and UL 508A specifications. It features 2 degree of pollution. This unit comes with output current and voltage ratings of 87A and 750VDC in that order. The power section of a drive controller must not be used without this power supply. The L1, L2, and L3 terminals encompass an M6 size screw thread.