When thinking of high-quality drive controllers for automation, think Bosch Rexroth as it is a company that excels in utilizing recent technology and highly mechanized engineering systems to manufacture IndraDrive controllers among other components. With highly dynamic systems, IndraDrive controllers can be used in various appliances. However, you should also comply with the technical and ambient conditions requirements.
For HMV01.1R-W0045-A-07-NNNN, the relative humidity for either storage or transport is 5-95% and absolute humidity of 1-60 g/m3. The ambient temperature to maintain during storage or transporting the HMV01.1R-W0045-A-07-NNNN components is -25-70°C. With these, your components should be able to function properly. The IndraDrive has electrolytic capacitors that may be damaged when stored for too long without use. As such, it is recommended that you use the driver controllers annually with at least an hour of operation.
The next major concern is the mounting process. First, consider the attitude. Normally, the height is 1000 meters but even up to 2000 meters is appropriate. However, for efficiency, the height of above 2000m to 4000 meters requires overvoltage limiters. As you install, leave some space on top and on the bottom of the HMV01.1R-W0045-A-07-NNNN components for proper air circulation to allow natural convection movements that enhance the performance of the internal blowers for an ambient temperature of the control cabinet. The permissible operating relative humidity is similar to that of transport and storage while the absolute humidity range is 1-29 g/m3. The ideal mountain position is indicated with an image on your document.
Upon installation of your IndraDrive, it is important to maintain the parts in their optimal conditions. As such, use foreign matters like cleaning agents that are recommended by Bosch Rexroth or/and carry out a compatibility test before use of third-party products to avoid bad reactions and thus damage.
|Power Supply Unit:||HMV|
|Cooling mode:||Air, internal (through integrated blower)|
|Rated Output:||45 kW|
|Protection Mode:||IP 20|
|DC-Bus Nominal Voltage:||DC 700V|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2019 - Wake Industrial - All Rights Reserved