HMV01.1R-W0018-A-07-NNNN

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
HMV Series Power Supply Unit manufactured by Indramat, Bosch, Rexroth. This Power Supply has a Rated Output of 18 kW along with a Regenerative of Power Supply.

HMV01.1R-W0018-A-07-NNNN

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
HMV Series Power Supply Unit manufactured by Indramat, Bosch, Rexroth. This Power Supply has a Rated Output of 18 kW along with a Regenerative of Power Supply.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Exchange
Call to find out about our exchange credit for your defective unit.
Sell Us Your Surplus
Have a HMV01.1R-W0018-A-07-NNNN to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

Bosch Rexroth has secured an enviable position as a reputable and professional company in manufacturing highly innovative and user-friendly automation parts. With the utilization of recent technology and highly effective engineering and manufacturing systems, Bosch Rexroth has been able to make IndraDrive controllers that are compatible with many appliances and that are safe. With innumerable designs and easy to use manuals, you can benefit from the drive controllers optimally.

HMV01.1R-W0018-A-07-NNNN requires specific ambient conditions during operation, storage, installation, and transport. To operate optimally, the temperature range should be -25 to 55°C with an absolute humidity of 1-29 g/m3 and a relative humidity percentage of 5-95%. Icing and moisture condensation are not allowed when operating HMV01.1R-W0018-A-07-NNNN. Finally, the climatic category of this driver controller is 1K3.

When transporting HMV01.1R-W0018-A-07-NNNN, condensation moisture and icing are not allowed as they will damage the components. The allowed absolute humidity level is 1-60 g/m3 and a relative humidity of 5 to 95%. The permissible transport temperature is -25 to 70°C. During the installation of HMV01.1R-W0018-A-07-NNNN drive controllers, you can comply with the temperature requirements by calculation of the heat levels in the control cabinet after which you make corresponding measurements to determine the particular ambient conditions in that control cabinet. That way, you protect your devices from damage and enhance user’s safety.

During mounting, you should maintain the temperature at 0 to 40 °C with a reduced nominal data. The normal height allowed during mounting is 1000 m above the sea level and up to 2000 meters as the peak height is allowed without voltage limiters. A peak attitude of 4000 meters is acceptable as long as overvoltage limiters are used.

 

 

  • HMV 01.1R-W0018-A-07-NNNN
  • HMV 1.1R-W0018-A-07-NNNN
  • HMV01 1R W0018 A 07 NNNN
  • HMV01.1R-W0018-A
  • HMV01.1R-W0018-A-07
  • HMV01.1R-W0018-A-07-NNN
  • HMV011RW0018A07NNNN
  • HMVO1.1R-W0018-A-07-NNNN

HMV01.1R-W0018-A-07-NNNN Technical Specifications

Power Supply Unit: HMV
Line: 01
Design: 1
Power Supply: Regenerative
Cooling mode: Air, internal (through integrated blower)
Rated Output: 18 kW
Protection Mode: IP 20
DC-Bus Nominal Voltage: DC 700V
Other Design: None