Product Description

The HMS02.1N-W0028-A-07-NNNN-AA drive controller is one of the most unique and sophisticated products manufactured by Rexroth Indramat. The drive controller is designed with a very high resolution, using the digital signals it receives from the AC motor through the motor feedback cable, it can independently carry out single and double axis position control in industrial applications. The drive controller is also very flexible; operators can configure it to operate in a broad range of industrial applications by inputting the right parameters into the controller's configuration modules. These configuration modules include the software module, the communication interface module, the input-output cards and lots more.

The HMS02.1N-W0028-A-07-NNNN-AA drive controller is designed to operate with a maximum current of 28Amperes and a rated control input voltage of 24volts ± 20 percent. The heat generated in the drive controller is regulated through the process of forced vibration; the controller is designed with a built-in air-blower and a heatsink to facilitate this process. The HMS02.1N-W0028-A-07-NNNN-AA drive controller can also weigh about 3.5 kilograms and has a Short circuit current rating 42000Amperes_rms. The controller is particularly effective when operated in ambient temperature that falls between 0 to +40 degrees Celsius.

The HMS02.1N-W0028-A-07-NNNN-AA drive controller uses a rated input current of 18.5 Amperes and a rated input voltage ranging from 254 volts to about 750 volts. The drive controller can be operated with a broad range of industrial motors such as the Asynchronous MAD Motors series, MSK synchronous motor series, the Synchronous Torque Motors and lots more. The motor is designed specifically to operate in industrial environments has its operation can not be supported by the low voltage power supplied to residential areas. This unit can be shipped globally with a one-year warranty period from Wake Industrial.