Product Description

The HMS01.1N-W0140-A-07-NNNN is a line 02 and design type-1 drive controller from Rexroth Indramat. It uses an air-cooling for heat dissipation. This equipment is a 3-phase IndraDrive controller and its max. current rating is 140 Amps. The bus voltage (DC) of the HMS01.1N-W0140-A-07-NNNN is 0.7 kV, and its design conforms with the indications of IP 20 material protection standards. The HMS01.1N-W0140-A-07-NNNN features an output frequency range of 0 to 1000 Hz and its SCCR is 42,000 A (root mean square).

Without reducing the rated data of the HMS01.1N-W0140-A-07-NNNN, its allowable surrounding air temperature must be at 40 ^oC for optimum operation. At reduced equipment specifications, the maximum permissible air temperature has a rating of 55 ^oC. The recommended mounting altitude of at nominal rated data is 0≤ m ≤ 1000 meters above sea lvl. During the transportation and storage of this drive controller, temperature levels must not fall below -30 ^oC, neither should it overshoot 80 ^oC. The minimum tightening torque of the screw connector of the HMS01.1N-W0140-A-07-NNNN is 0.5 Nm.

The pollution degree of this model of the HMS drive controller is 2, and the range of its control voltage is between 19.2 volts - 28.8 volts. The housing of this drive controller has a dimension of 352 mm x 205 mm x 50 mm. On top of this drive controller, the minimum permissible distance is 80 mm, and at the bottom, the minimum permissible distance is 80 mm. There is no horizontal spacing on the HMS01.1N-W0140-A-07-NNNN. At continuous DC bus power, the HMS01.1N-W0140-A-07-NNNN dissipates power at up to 965 Watts. The description of this equipment is as indicated by the UL 508 C standards and the CSA standards. This unit can be shipped globally with a one-year warranty period from Wake Industrial.