Product Description

The Bosch Rexroth HMF01.1A-N0K2-D0073-A-500-NNNN motor filter comes with 01 line code and 1 variant code. This filter comes with a 3 x 100µH specific inductance. The product redirects the voltage pulses back to its original direction if the impedance on both cable ends does not match. The device avoids the possibility of motor insulation breakdown. It also protects the bearings and windings of the motor. The filter has a nominal current rating of 73A. It has a size of 270 x 315 x 225 mm (D x H x W). The device comes with a limiter fitted to it. The product has 3 x 500VAC rated voltage.

The filter has a power dissipation of 160W. The device is attached to the output of an inverter or converter. It has maximum of 200Hz motor frequency. The unit can be operated with several motors that have parallel connection by means of long supply lines. The product restricts the increase of output voltage of the associated drive controller. The device shields the motor from voltage spikes. The filter ensures that the peak voltage does not exceed 1,000 volts. It is possible to dispatch the HMF01.1A-N0K2-D0073-A-500-NNNN filter to your address in any country across the globe.

The positioning of the motor filter at the inverter output helps it to lower the leakage current of its motor wires. The filter comes fitted with a type plate that encompasses details such as the part number, output voltage rating, nominal current and frequency rating. The product incorporates an IP 10 level of protection according to IEC 60529 standards. The device has a weight of 15kg. It stops the voltage peak from increasing beyond 1kV and prevents any adverse impact on the winding insulation. The filter is transported in custom military-grade packaging. This motor filter is backed up by a warranty support for a period of one year.