Product Description

The HLC01.1C-02M4-A-007-NNNN is a product of Bosch Rexroth Group. It is a DC capacitor that acts as a component of IndraDrive drive systems. It features an input voltage of 245 – 750 DC V, a 2.4mF nominal DC bus capacitance, 200S discharge time from 820V to 50V and insulation resistance of >25MOhm. It comes with a natural convection cooling method and a power dissipation of 24W. The ambient operating temperature is 55 degrees. A high input voltage translates into lower stored energy since the difference in voltage between the DC bus voltage and the bleeder threshold decreases.

The HLC01.1C-02M4-A-007-NNNN comes with an X1 Bus module that facilitates the exchange of data between devices. When looped to other devices at the DC bus capacitor, it does not affect the transfer of data. Leave an 80mm minimum mounting clearance to facilitate adequate airflow and cooling. The DC capacitor weighs approximately 4.3kg. The HLC01.1C-02M4-A-007-NNNN should be mounted directly beside the drive controller if it has the highest DC continuous power. Distance bolts are provided to compensate for the difference between the DC capacitor and drive controller mounting depth. They should be mounted on the bright side of the control cabinet.

The HLC01.1C-02M4-A-007-NNNN features a 700V DC bus nominal voltage, an IP 20 protection category, and 300mm mounting depth. This DC capacitor is intended for application with less than 30 cycles per minute since applications with higher cycle time can cause damage to the controller. You can use it for industrial applications that need certain energy after mains supply failure. The capacitors hold high voltage after switching the power off. Wait 30 minutes before touching any part to avoid electrocution. It comes with a one year warranty.