Product Description

The HLC01.1C-01M0-A-007-NNNN is a DC Bus Capacitor unit that is an additional component of the Rexroth IndraDrive drive system. It is used when you want to increase the storable DC Bus energy. Some of the ideal applications include applications that require shorter cycle times. It reduces the continuous power of the braking resistor. It is used in applications that require a specific amount of energy in the event of mains supply failure. Another area is to back the DC bus in drive systems with DC bus connections between the drive controllers.

The HLC01.1C-01M0-A-007-NNNN is not ideal for applications that have more than 30 cycles per minute since this overloads the capacity and can lead to potential damage to the drive controller. It features 1 line and 1 design, a mounting depth of 300mm, and 1,0mF nominal capacitance. The degree of protection is IP 20 and the DC bus nominal voltage is 700V. During mounting, ensure the DC capacitor with the highest continuous power is mounted next to the drive controller. There is the provision of distance bolts to compensate for the mounting depth difference between the DC capacitor and the drive controller. They should be used on the capacitor next to the controller.

The HLC01.1C-01M0-A-007-NNNN weighs 3.2kg. The allowed input voltage is 254 - 750 DC V, the maximum discharge time from 820V to 50V is capped at 175S, and the maximum current at ambient conditions is 20A. It features a natural convention cooling method. Leave a clearance below the DC capacitor to allow optimum airflow and cooling. You should wait for at least 30 minutes after switching the power off to allow the capacitors to discharge lethal voltage. This unit can be shipped globally with a one-year warranty period from Wake Industrial.