Product Description

The Rexroth HDS05.2-W300N-HT20-01-FW belongs to the Indramat HDS drive controller family. As per the practice of Rexroth, the firmware for each drive controller is not shipped with the drive. Rather it is ordered separately so as to comply with features required by the customer. The HDS05.2-W300N-HT20-01-FW is a line 5, version 2 controller which is installed inside a DIAX04 chassis which is capable of housing multiple controllers. Command communication interface on the controller, which provides the control interface, is SERCOS. The HDS05.2-W300N-HT20-01-FW is a convection cooled controller which comes with internal blower. To aid airflow around the controller, Rexroth recommends minimum spacing of 90 millimeters in front of the controller, 80 millimeters above the controller and 100 millimeters below the controller. The minimum mounting clearances may need to be increased depending upon the bend radius of the motor power cable.

Approximate weight of the controller and its dimensions are 25 kilograms and 498 x 256 x 200 millimeters. Enclosure of the HDS05.2-W300N-HT20-01-FW has IP 10 rating. Nominal and peak current rating for the HDS05.2-W300N-HT20-01-FW are both 300 Amps. The continuous current ratings vary with the clock frequency of the power section: it is 100 Amps at 8 kilohertz and 175 Amps at 4 kilohertz. When the HDS05.2-W300N-HT20-01-FW is operating with rated continuous current at its output the approximate power loss is 1200 Watts. The advanced signal processors on the HDS05.2-W300N-HT20-01-FW require 55 Watts power from a 26 Volts DC source. Function ID code for the controller is 20 and the version of function ID is 01. To prevent injury, persons with metal implants or pacemakers should be prevented from going near an operating HDS series controller. This unit can be shipped globally with a one-year warranty period from Wake Industrial.