HDS05.2-W300N-HS58-01-FW

  • Rated 4.5 (23 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The HDS05.2-W300N-HS58-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 300A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock! HDS05.2-W300N-HS58-01-FW | Rexroth, Bosch, Indramat HDS Drive Series | Image

HDS05.2-W300N-HS58-01-FW

  • Rated 4.5 (23 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The HDS05.2-W300N-HS58-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 300A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a HDS05.2-W300N-HS58-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The HDS05.2-W300N-HS58-01-FW is a drive controller designed by Rexroth Indramat. The controller weighs about 25 kilograms and consumes about 55 watts of power for signal processing. The HDS05.2-W300N-HS58-01-FW drive controller is produced by industrial professionals and has been tested before delivery to ensure it meets the international quality standard for industrial products. The controller is also quite flexible in its operation; it can be configured by the operator to control different types of industrial motors such as the 1MB motor, MKD motor, and so on. This drive controller's flexibility and efficiency make it popular among industrialists that operate a broad range of industrial machines, textile machines, packaging machines, paper processing machines, and lots more.

The HDS05.2-W300N-HS58-01-FW drive controller requires a continuous current of about 100 Amperes for optimum operation; however, it can draw a maximum current of 300 Amperes from the power supply unit. If the drive controller is required to carry out a high number of start-stop cycles, then it is important for the operator to connect an additional HZK capacitor module to the controller.

The HDS05.2-W300N-HS58-01-FW drive controller is designed with a built-in air blower and a heatsink, which helps to keep the heat generated by the controller within the permissible temperature range. While operating with the continuous current, the HDS05.2-W300N-HS58-01-FW drive controller also loses about 1200 watts of power. The controller's efficiency depends on the ambient temperature and the elevation level at which it is installed; thus, operators should ensure the HDS05.2-W300N-HS58-01-FW drive controller is not installed at a height greater than 1000 meters above sea level or in ambient temperature greater than +55 degree celsius.

HDS05.2-W300N-HS58-01-FW Documents

  • HDS052W300NHS5801FW
  • hds05.2-w300n-hs58-01-fw
  • HDS05 2 W300N HS58 01 FW

HDS05.2-W300N-HS58-01-FW Technical Specifications

Controller Family: DIAX04
Rated Current: 300A
Cooling Type: Air, internal (with built-in blower)
Command Communication: SERCOS Interface
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo