Product Description

The HDS05.2-W300N-HA03-01-FW drive controller belongs to the HDS series of such controllers. The modular design of this device allows it to act as a rapid response drive. This product supports the use of an HZF power connection module apart from the HVE or HVR supply module. It must not be serviced or installed without reading the documentation provided. The device should be stored, transported, assembled and installed properly for safe operation. The unit must not be operated at any point in time if there is no permanent connection of the ground wire, even if it is for a short period. Its electrical connection points should also not be touched when the power supply is on.

The drive controller is cooled using internal air circulation. This device has a function ID code of 03. It has a continuous current rating of 175A at a 4kHz clock frequency of the power section. Load factors must be taken into consideration if this unit has to be operated outside the specified range. However, the product is prone to damage when it is operated outside of the ambient conditions. The unit is intended for mounting in a closed housing, following EN 50175/1988 specifications. The power connection for the controller is received through the X1 connector. The device is available with a one-year warranty period.

The command communication for the HDS05.2-W300N-HA03-01-FW drive controller is established through an analog interface. The basic unit has a power consumption of 55W for signal processing. The device must be installed within a maximum altitude of 1,000m above sea level. It has a protection category of IP 10 according to DIN 40 050 specifications. This product is ideal for use in applications such as mounting and handling systems as well as machine tools. The unit can help in controlling electrical motors from Bosch Rexroth and observing their operation. The drive controller can be sent to any address through our delivery partners like DHL and FedEx.