COVID-19 Update: Wake Industrial is open and available to support your automation needs.

HDS05.2-W300N-HA01-01-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
  • Stock: In-Stock, Ships 3-5 Days
  • Factory New Pricing Available! Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The HDS05.2-W300N-HA01-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 300A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

HDS05.2-W300N-HA01-01-FW

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
  • Stock: In-Stock, Ships 3-5 Days
  • Factory New Pricing Available! Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The HDS05.2-W300N-HA01-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 300A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a HDS05.2-W300N-HA01-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The HDS05.2-W300N-HA01-01-FW is one of the several drive controllers in the DIAX04 family from Bosch Rexroth. The product has a line code of 5 and a version code of 2. This device is meant for use with the MHD and MKD series of motors from the manufacturer. It can be connected to an HVR or an HVE supply module that supplies both the power and signal voltages of the controller. The unit must only make use of spare accessories and parts that are approved by the manufacturer. The controller should be installed only in commercial machinery. The device has a rated current of 300A. The drive controller supports a one-year warranty period.

The terminals of this device must be connected only to protective extra low-voltage electrical components, equipment and cables. This product may experience dangerous movements if the control of the motor to which it is connected is faulty. The drive power connection must be isolated using an emergency stop circuit to avoid unintentional startup. The device should be programmed before it is started so that the motor is capable of executing the explicit functions of an application. It can be used in both multiple-axis or single-axis control and drive applications. The unit is one of the several HDS series of drive controllers.

The drive controller has a power loss of 1,200W with continuous current. The maximum ambient temperature allowed for operation with derated data is 55°C. The product has a modular structure. It must not be used if the ambient conditions are not met. The firmware for the controller has to be ordered separately. The unit makes use of an analog interface of type DAE02.1M for command communication. The device supports the use of only one plug-in module or interface card at a time. The drive controller can be transported to any part of the globe through our international logistics network.            

HDS05.2-W300N-HA01-01-FW Documents

  • HDS052W300NHA0101FW
  • HDS05 2 W300N HA01 01 FW
  • hds05.2-w300n-ha01-01-fw

HDS05.2-W300N-HA01-01-FW Technical Specifications

Command Communication: Analog
Controller Family: DIAX04
Cooling: Internal Blower
Rated Current: 300A