HDS04.2-W200N-HT21-01-FW

  • Rated 4.6 (7 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The HDS04.2-W200N-HT21-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 200A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock! HDS04.2-W200N-HT21-01-FW | Rexroth, Bosch, Indramat HDS Drive Series | Image

HDS04.2-W200N-HT21-01-FW

  • Rated 4.6 (7 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The HDS04.2-W200N-HT21-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 200A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a HDS04.2-W200N-HT21-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

Bosch Rexroth provides services in manufacturing and development of energy-efficient equipment for industrial automation. The company’s products such as drive controllers, frequency converters, and small operator terminals are widely used in the market.

The HDS04.2-W200N-HT21-01-FW model reflects the modern design and manufacturing by Rexroth Indramat and the model is widely used in different industries for automation purposes. The HDS drive controller is used to control and monitor the operation of MKD, MHD, 2AC, and 1MB AC synchronous motors. The model can operate together with an HVR power supply module which supplies electrical power to the drive controller. The 200 A of rated current is required to drive the internal circuit of the model. The model is protected under IP 10 protection standard which provides resistance against solid particles having a diameter greater than 50 mm but it will not provide any protection against water. The software module (CLC-D02.3M-FW) of the model contains the operating software of the module and in the event, if the unit must be replaced, the software module can simply be transferred to the replacement unit. The model performs effective communication between control, motor, and other I/O devices through the SERCOS interface.

The model HDS04.2-W200N-HT21-01-FW can operate normally under the temperature range of +5 to +45 degree Celsius and it can be stored easily between the temperature ranges of -30 to +85 degree Celsius. The drive with high power needs should be arranged as close to the power supply unit as possible. The model uses the RS-232 or RS-485 interface for PC connection and the X4 port is used for motor feedback connection. The X6 port provides a connection for motor brake and motor temperature monitoring. An internal blower unit is installed in this model and the net weight of the controller is approximately 19 kg. This unit can be shipped globally with a one-year warranty period from Wake Industrial.

HDS04.2-W200N-HT21-01-FW Documents

  • HDS042W200NHT2101FW
  • hds04.2-w200n-ht21-01-fw
  • HDS04 2 W200N HT21 01 FW

HDS04.2-W200N-HT21-01-FW Technical Specifications

Controller Family: DIAX04
Rated Current: 200A
Cooling Type: Air, internal (with built-in blower)
Command Communication: SERCOS Interface
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo