COVID-19 Update: Wake Industrial is open and available to support your automation needs.

This company was fantastic to work with! Very patient with us to make sure we ...

~ Carla Morgan Excellent Kentucky, USA

View All Reviews

HDS04.2-W200N-HT19-02-FW

  • Rated 4.8 (6 total ratings)
  • Stock: In-Stock, Ships 3-5 Days
  • Call for Expedited Shipping and Product Condition Options
The HDS04.2-W200N-HT19-02-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 200A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

HDS04.2-W200N-HT19-02-FW

  • Rated 4.8 (6 total ratings)
  • Stock: In-Stock, Ships 3-5 Days
  • Call for Expedited Shipping and Product Condition Options
The HDS04.2-W200N-HT19-02-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 200A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a HDS04.2-W200N-HT19-02-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

Bosch Rexroth is concerned about their customer’s satisfaction through their high-quality and energy-efficient products such as drive controllers, servo drive modules, and brake resistors. These products are widely used for automation purposes in different industries.

The HDS04.2-W200N-HT19-02-FW model is designed and manufactured by Rexroth Indramat. The model should only be used in the manner that is defined as appropriate, to avoid any property damage or injury to personnel. The HDS drive controller comes in a modular design and it represents the DIAX 04 family. The drive controller is made up of a basic unit, a command communication module, additional plug-in modules, a software module, and a configuration type plate. There are 5 plug-in slots in the basic unit and the slot U1 contains a DSS02.1M SERCOS interface module for command communication between the controller and other I/O devices. Slot U2, U3, and U4 are used to install different additional plug-in modules according to the required configuration and version function numeric code. The software module (CLC-D02.3M-FW) is installed into the U5 slot of the basic unit and the power consumption by the software module is approximately 6 W.

The model HDS04.2-W200N-HT19-02-FW is designed to operate at the rated current of 200 A, and the model having 4 kHz/8 kHz of switching frequency operates at the continuous current of 120/80 A. The motor takes electrical power from the respective power supply unit through L + and L – terminals. The model is equipped with an H1 status display and an S1 fault reset key. The permissible temperature range for the model is approximately +5 to +45 degree Celsius without derating. The controller takes motor feedback through the X4 serial port. The firmware for this model should be ordered as a separate sub-item. A blower unit is installed inside the control cabinet of the drive controller that uses natural air for cooling purposes. Get this HDS04.2-W200N-HT19-02-FW product along with a one year warranty from Wake Industrial.

HDS04.2-W200N-HT19-02-FW Documents

  • HDS042W200NHT1902FW
  • hds04.2-w200n-ht19-02-fw
  • HDS04 2 W200N HT19 02 FW

HDS04.2-W200N-HT19-02-FW Technical Specifications

Rated Current: 200A
Cooling Type: Air, internal (with built-in blower)
Controller Family: DIAX04
Command Communication: SERCOS Interface