Technical specifications of the product HDS03.2-W100N-HS28-01-FW reveal that it is a servo drive associated to the HDS series and is broken down by a number of different components. These components are controller base, module for conducting command communications, module for running the software mechanism, provision of an effective configuration for three extra plug-in systems and finally a plate enabled for meeting the configuration objectives. Other features of the HDS based Drive Controller are the existence of a Rated Current of around 100 Amperes which also features an in-built blower system responsible for cooling the air. The product earns its association to the Controller Family DIAX04 and the Command Communication system essentially operates based on the use of the SERCOS Interface that helps in running the machinery smoothly.
The suppliers of the drive controller product are required to essentially clarify the manner of handling, installation and the safety requirement associated with the use of the product. A thorough understanding of the above-mentioned parameter is needed to be taken into account before deciding on installing and using the system. Again, the different operation like assembling, installation and also the carrying out of the operations concerning the drive controller is needed to be carried out by technically trained and experienced persons associated with completing all the operation of the device.
The technical and electrical staffs are required to be trained in an adequate manner for grounding of the equipment in an effective manner for meeting the safety requirements as underlined in the product document. Installation and operation of the system are permissible by Bosch Indramat in such a way that the same meets the directives as provided in the EMC Regulations.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved