HDS03.2-W100N-HS12-01-FW

  • Rated 4.5 (31 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911190010
  • Stock: In-Stock, Ships Fast
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The HDS03.2-W100N-HS12-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 100A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock! HDS03.2-W100N-HS12-01-FW | Rexroth, Bosch, Indramat HDS Drive Series | Image

HDS03.2-W100N-HS12-01-FW

  • Rated 4.5 (31 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911190010
  • Stock: In-Stock, Ships Fast
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The HDS03.2-W100N-HS12-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 100A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a HDS03.2-W100N-HS12-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The HDS03.2-W100N-HS12-01-FW is a configured drive controller from Bosch Rexroth. The drive controller is one of the HDS series of controllers of its type from the manufacturer. The device features a line code of 3 and a version code of 2. It belongs to the DIAX04 controller family. The unit encompasses a command communication module that refers to several plug-in modules. The HSM type software module incorporates the operating software or firmware of the drive and all drive-related parameters. The product has a current rating of 100A. The configured product comes with a warranty backup of one year.

The drive controller may be installed up to a maximum elevation of 1,000 meters above sea level. The unit must be mounted only in the direction specified by the manufacturer. It should be fastened in position inside the control cabinet using a mounting rail with SUP-M01-HD type designation. The product features two type plates. One of them is the type plate of the basic device. The other type of plate provides details of the entire configuration. The device is intended for use in several of the manufacturer’s AC motors to help in monitoring their operation. The controller must always be connected to the HVR or HVE supply module that offers the power and signal voltages.

The firmware of the configured drive controller must be ordered separately. The cooling mechanism of the controller is ensured through internal air circulation. If high drive performance is needed and the power supply system does not have regeneration capability, it is vital to incorporate an extra HZB brake resistor. This helps to control the generated energy due to the braking action. The unit must not be allowed to function in faulty or damaged products. The product has a modular design. The configured drive controller can be sent to the address of your choice.

HDS03.2-W100N-HS12-01-FW Documents

  • HDS032W100NHS1201FW
  • HDS03 2 W100N HS12 01 FW
  • hds03.2-w100n-hs12-01-fw
  • HDS03 2 W100N HS12 01 FW

HDS03.2-W100N-HS12-01-FW Technical Specifications

Command Communication: Sercos
Controller Family: DIAX04
Cooling: Internal Blower
Rated Current: 100A
Cooling Type: Air, internal (with built-in blower)
Rated Current: 100 A
Controller Family: DIAX04
Command Communication: SERCOS Interface
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo