Bosch Rexroth is one of the most renowned engineering companies in the world for creating drives and robotic automation components. The is because of the modular and flexible nature of their drives, controls, and gears that have made it possible for them to be used for a wide array of functions.
The HDS03.2-W075N-HS41-01-FW is a class of the second generation HDS drive controllers with a Servo function, along with an analog or a parallel interface. With the use of the MHD, MKD and MKE motors, all parameters that are dependent on the motor can be stored within the motor feedback. Furthermore, the storage of the application module of this drive controller is located in the programming module. This storage application includes the mechanic system, control loop, interface parameters and so on. The drive controller can store data temporarily through the RAM and permanently through the EEPROM although the data must be transferred via the service channel. Also, if by any means the firmware is changed, the drive controller will be able to detect it the moment the machine is switched on.
The HDS03.2-W075N-HS41-01-FW has a minimum distance on the bottom of the drive for air intake and air outlet at 300 mm, the rated control voltage input as 26 ± 2%, the rated power consumption control voltage input without holding brake, without control section at 25 W, and the short circuit current rating symmetrical amperes as 42000 A.
The HDS03.2-W075N-HS41-01-FW also has its maximum output voltage at 500 V, its maximum output frequency at 1000 Hz, its output number of phases at 3 and its device height, depth and width at 498 mm, 308 mm and 100 mm respectively.
|Version of Function ID:||1|
|Cooling Type:||Air, internal (with built-in blower)|
|Rated Current:||75 A|
|Command Communication:||SERCOS Interface|
|Function ID Code:||41|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2019 - Wake Industrial - All Rights Reserved