BoschRexroth is an engineering company which manufactures electrical and hydraulic automation products for the manufacturing and service industries. They produce products tailored to the needs of their consumers.
For the HDS03.2-W075N-HS33-01-FW the branch circuit protection has to be supplied externally according to the maximum values of both the voltage and current or the values of voltage and the Full Load Ampacity of the fuses. It also contains optional interface modules that are relevant for entering in communications command. It makes use of an analog diagnostics output and a great ribbon cable bus connection. It contains an optional holding brake and the PTC/ NTC depend solely on its motors. The power voltage makes use of the L+ and L- power voltage DC bus rails, a serial interface and a shield for the motor cable between the AC motor and the drive controller itself.
The feedback connector makes use of an MKD/ MKEresolver and an MHD/ MKEHSF. For the DC bus voltage connection where adjacent drive controllers are usually connected through the connection wires provided with the drive, an impossible connection through the wires can be rectified by using twisted supply lines that are as short as possible with the maximum length of 1 m and the minimum length of 25 mm2. Also, the motor cable is usually shielded and attached to the XS1 with the use of the enclosed clamped fitting. This clamp fitting can also be matched to the diameter of the cable on the mounting panel by simply selecting what is regarded as the relevant clamp base. The mounting plate can be both horizontally or vertically arranged.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved