HDS02.2-W040N-HT25-01-FW

  • Rated 4.7 (33 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The HDS02.2-W040N-HT25-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 40A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock! HDS02.2-W040N-HT25-01-FW | Rexroth, Bosch, Indramat HDS Drive Series | Image

HDS02.2-W040N-HT25-01-FW

  • Rated 4.7 (33 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Stock: In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The HDS02.2-W040N-HT25-01-FW Servo Controller is manufactured by Rexroth Indramat Bosch. This controller is cooled by an Internal Blower, and has a rated current of 40A. This HDS controller is not equipped with Command Communication and the Controller Family is DIAX04.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a HDS02.2-W040N-HT25-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The HDS02.2-W040N-HT25-01-FW drive controller finds its place among the several HDS series of controllers manufactured by Bosch Rexroth. This controller supports internal air circulation through an inbuilt blower for cooling during operation. The product should be equipped with a copper conductor of a minimum of 10mm2 cross-section over the complete protective connection. The device must always be connected to the protective conductor before its startup. It may have dangerous movements due to the wrong or unclean wiring of cable connections. The unit can operate at a maximum temperature of 55°C with derated data. The drive controller comes with a warranty tag of one year from Wake Industrial.

The vertical axes of this controller should be secured against slipping or falling after the connected motor is switched OFF. The resistors, housing, and heatsink of the product become very hot during use and pose the danger of burns to the user. Its installation must be carried out according to the regulations specified in the documentation. The device should not be operated or mounted in a damaged state. The unit is designed to monitor and control electrical motors with additional actuators and sensors if needed. The controller must be programmed before it is started so that the motor executes the application-specific functions.

The DIAX04 family drive controller can be used in both single-axis and multiple-axis control, and drive applications. The product is a good choice for use in handling and mounting systems. The modular device should not be operated underwater. It features a software module, a command communications module, a configuration type plate, and additional plug-in modules in its configured state. The slots of the basic unit are empty by default. The software module incorporates the firmware or operating software of the drive. The extra plug-in modules can be fitted in the slots U1 to U4. The HDS02.2-W040N-HT25-01-FW controller can be delivered through a reliable delivery network.

HDS02.2-W040N-HT25-01-FW Documents

  • HDS022W040NHT2501FW
  • hds02.2-w040n-ht25-01-fw
  • HDS02 2 W040N HT25 01 FW

HDS02.2-W040N-HT25-01-FW Technical Specifications

Product Group: HDS
Line: 2
Version: 2
Cooling Type: Air, internal (with built-in blower)
Rated Current: 40 A
Other Versions: None
Controller Family: DIAX04
Command Communication: SERCOS Interface
Function ID Code: 25
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo