Product Description

The HDS02.2-W040N-HT20-01-FW is an HDS series servo drive controller from Bosch Rexroth. This drive controller must always be stored in conductive packing in dust and shock-free dry place. The firmware for the product should be ordered separately as a sub-item. The device is intended to control and monitor electric motors using additional actuators and sensors if necessary. It is designed to be used in multiple-axis and single-axis drive and control applications. The unit must not be operated underwater, in extremely high temperatures or when there is high temperature fluctuation. The servo drive controller is available with a one-year warranty period.

The compact HDS02.2-W040N-HT20-01-FW servo drive controller encompasses a modular structure. This device has a continuous current rating of 20A at 4kHz and 15A at 8kHz. It has a power loss of 125W with continuous current. The product can operate at a maximum temperature of +55°C with derated data. It must be installed below an elevation of 1000 meters above sea level without the rated data getting reduced. The unit supports digital interface cards that facilitate bi-directional data exchange as additional plug-in modules. The device allows the use of just one plug-in module at a time. The DRF, DZF or DLF modules can be used together.

The servo drive controller features Class C insulation as per DIN VDE 0110 specifications. This product must be stored and transported between a temperature range of -30°C and +85°C. The DFF01.1M interface card that is used to connect single-turn GDS 1.1 measuring systems has a power consumption of 3.6W. The mounting rail on which the controller is fastened to the control cabinet must be screwed to the mounting panel in alternate slots. The device can also be mounted inside a closed housing that meets EN 50175/1988 specifications. We can send the HDS02.2-W040N-HT20-01-FW servo drive to any address worldwide through our shipping partners.