Product Description

The HDS02.2-W040N-HT17-01-FW servo drive controller in the HDS series from Bosch Rexroth belongs to the DIAX04 controller family. This servo drive controller makes use of a SERCOS interface for command communication. It has a power consumption of 1.5W. The front display of the product has a fault reset key and a status display to notify error and warning. This unit must be checked before startup to ensure that it encompasses all that is mentioned on the configuration type plate. The device has a protection category of IP 10 according to DIN 40 050 specifications. The drive controller comes along with a one-year warranty period.

The servo drive controller must be fastened into a control cabinet with the help of a mounting rail. The mounting rail has a type designation of SUP-M01-HD. The device may get damaged if the mounting orientation is incorrect because it may result in overheating. The control cabinet must be designed in accordance with the safety regulations related to shock-hazard protection. The controller must have a mounting clearance of at least 100mm underneath it. This clearance is also dependent on the motor power cable’s bending radius. The power loss of the HDS02.2-W040N-HT17-01-FW drive includes the configuration related losses, losses of the power section and control unit, as well as the power section’s current related losses.

The cooling system used in the control cabinet must be kept in such a way that the water condensation formed does not fall on the drive controller. It operates at an optimum temperature of +40°C. The signal or control cables should not be routed near magnetic fields, high-frequency units or high-voltage supply lines. The product must be transported using suitable shock transportation equipment with shock-absorbing supports to prevent impacts due to vibrations and shocks. The HDS02.2-W040N-HT17-01-FW servo drive can be delivered to any address worldwide through our global network.