The drive controller series of HDD02.2-W040N-HD32-01-FWA is designed and manufactured by Bosch Rexroth Indramat is equipped with technology to operate two motors efficiently. Besides having a fixed configuration, this series also has an additional connection to accommodate an incremental measuring system and a SERCOS interface guide. Since the model belongs to line 2 and version 2 of the HDD series, therefore, in order to maintain the temperature of the motor and extend the working hours of the drive controller, a pre-installed cooling system is there that comes with built-in blower.
The function ID code and the version are both determined by Bosch Rexroth Indramat. The maximum rated current is 40A within the drive and it belongs to the controller family of DIAX04. Firmware is another part of the HDD02.2-W040N-HD32-01-FWA which must be ordered separately according to the requirements and the functions that are required to be fulfilled. Since the communication control is SERCOS interface, optical fibres facilitate the operation of SERCOS interface compatible controls and the digital drives. The optical fibres and the receiver circuits are designed complying with the interface specification. The transmitter circuit is operated in 2 stages, where it corresponds to both higher and lower transmitter power aligns it with the interface specification.
The HDD external inputs have connectors X12.1/X12.2 which are pre-mounted with a fixed configuration and hence cannot be altered. The cooling system must follow certain conditions to make sure that no harm is done to the overall devices while controlling the temperature of the drive controller. It is mandatory to arrange the cooling system in a manner that there is no scope of any water droplets dripping on the electrical device within the component. The handler of the drive must always take care that no condensed water droplets collected by the blower are sprayed on the internal devices.
|Version of Function ID:||01 (Determined and documented by Indramat)|
|Cooling Method:||air, internal (with built-in blower)|
|Rated Current:||40 A|
|Command Communication:||SERCOS interface|
|Function ID Code:||32 (Determined and documented by Indramat)|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved