The HCS04.2E-W0790-N-04-NNNN control drive is described below. Bosch Rexroth manufacturers this product for use in industrial automation and manufacturing settings by end users.
We can say that the HCS04.2E-W0790-N-04-NNNN is similar to the HCS04.2E-W0790 to an extent if not for the addition of certain other parts that are not available in other forms of the drive. These parts consist mainly of cables, fuses, and circuit boards that are necessary for certain automated actions can be carried out effectively. The fuses used in this drive part are particularly for coupling with DC buses and as a result are rather extremely fast for semi-conductor protection. Originally, the HCS04.2E-W0790-N-04-NNNN does not come with any input line fuses so they must be provided externally just in case the mechanisms for the converter’s electronic input fails. Furthermore, the converter determines the maximum motive power that can be produced by the entire group.
The drive part in itself uses a pre or conduit fuse of 630.) A, a Cu cable of 2 x (3 x 185) mm2, a Mains fuse converter protection of 630 A sf F and a Lines in control cable of 2 x 150 mm2 per phase. The maximum continuous current is 481 A with a maximum connection of M12 and a motor cable line of 2 x (3 x 150) mm2 for high overload while for the high continuous load, it makes use of a pre-conduit fuse of 800 A or a Cu cable of 3 x (3 x 185) mm2, a mains fuse converter protection of 800 A sf F, and a lines in control cabinet of 3 x 150 mm2 per phase.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved