Bosch Rexroth builds drives for industries that make use of hydraulic, electronic and mechanical components so that controlling machines, that are necessary in the varying industries, can be done in a smooth, easy and effective manner.
The HCS04.2E-W0640-N-04-NNNN is a control drive part from the class of HSC04.2E with a converter that uses a typical motor power of 250/200 KW, a continuous output power of 268/333 V, a storage or transport temperature of -25 … + 70 â—¦C, and an installation altitude with its maximum installation set at the of 3000 m. The installation altitude also goes up to 1,000 m, above derating by 1% per 100m.The allowed pollution degree is 2 in accordance with the EN 61800-5-1. Furthermore, the operating temperature is -10 … +40 â—¦C when sized with both high and continuous overload. Note that all these results are calculated at 3AC 400 V mains voltage and fs = 4 KHz switching frequency.
The HCS04.2E-W0640-N-04-NNNNitself uses a high overload pre-conduit fuse of 500 A or a Cu cable of 2 x (3 x 150) mm2, a mains fuse converter protection of 500 A sf D, and a lines in control cabinet of 2 x 120 mm2 per phase while in the high continuous load, it makes use of a pre-conduit fuse of 630 A or a Cu cable of 2 x (3 x 185) mm2, a mains fuse converter protection of 630 A sf E, and a lines in control cabinet of 2 x 150 mm2 per phase. The HCS04.2E-W0640-N-04-NNNNalso makes use of the Class J 600 A max. of the UL fuses 600 V type which are known to be extremely fast acting.
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved